3DMeasurement Profile Measurement

Basic Profile Measurement

On the [Basic Profile] tab, measurements of height, width, area size, diagonal, surface length, and roughness (Ra, Rz, and Rzjis) are available.
Data values are refreshed in real time when the 3D Cutter is moved.
The setting of the cut-off value can be changed, and displays of the roughness curve and the waviness curve are available.
When the [Add to List] button is clicked, the acquired data values are added to the list in the data window.

Measuring Angle

3DMeasurement is equipped with three measurement modes for angle measurement: [2-Point Measurement], [3-Point Measurement] and [4-Point Measurement].
Measure angles instantly by just clicking the designated number of points in the profile section.

Measuring Radius

There are two measurement modes: [2-Point Measurement] and [3-Point Measurement].
Measure the radius instantly by just clicking the designated number of points.

Average Difference in Height

For measuring average difference in height, select a measurement mode ([2 Intervals] or [3 Intervals]), then specify the intervals in the profile section. 3DMeasurement automatically calculates the average height for the specified intervals.

Comparison Measurement

Register a standard profile and execute comparison measurement with the measurement profile.
Digitizes the difference in shape for increased/decreased area by laying the profiles on top of each other.